Spoke Tight
15 ML
Apply right before wheel building
Good for 20 wheels
Direction of Use:
1. Insert spokes into hubs first. Later spoke insertion may stain the hub holes.
2. Apply 1-2 drops onto the threads end of spokes
3. Engage slightly spokes and nipples from the rim side
4. Start trueing wheel. The glue on the spokes' end will cover the threads by nipples' engagement.
5. In 3 hours, glue gets 30% dry. Wheels are still workable in this period.
For best results, better trueing wheel before the glue drying.
Preservation:
1. Store in place without direct sunlight or heat
Safety:
1. Keep out reach of children
2. Wear gloves to avoid long contact to glue
3. Once allergy occurs, rinse with water
Terms of Use:
1. By opening this bottle, you agree to follow said condition and instruction above.